Arduino Pro Mini Microcontroller with Bootloader


Arduino Pro Mini Microcontroller with Bootloader
Images/31811-large.jpg Images/360-3D.jpg   California Proposition 65 Warning
Stock Number: 31811 MP
 Review Average:  
 Number of Reviews: 3
 View Reviews | Review this item
$4.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Arduino PRO MINI AVR Core Development Board with
Installed Bootloader
Arduino ProMini Clone - Get the same power as the UNO, or Nano in a low cost and small footprint. Features a Atmega328, 8bit, 16mHz processor, built in 3.3V regulator, 8 analog inputs and up to 14 digital I/O pins. This module does not have a USB connector. There are 5 dedicated 100 mil spaced pads for connecting the FTDI cable (DTR,TXO,RXI,VCC,GND) or a USB/TTLconverter module. The ProMini is ideal for use after you have perfected your idea on a Nano or Uno and want to embed it in the final project. Intended for advanced users. 1st. time Users should take advantage of the Arduino Nano to gain skills. Header pins not included. Code libraries, applications and schematics, Information & Freeware available through www. arduino.cc.en and others on-line.
The pre loaded Bootloader, allows Programming with an (off board) USB to TTL converter (our Stock # 31573) or a FTDI smart cable
Processor: Atmega328 @ 16mHz
Power: 3.3-6VDC On-Board 3.3 V Regulator
Note: for 3.3V input Use the Vcc Pin
for 4-6V input Use the RAW pin NOT BOTH
Supply Current 4 – 9mA (no load on I/O)
Analog Inputs 8 (10-bit ADC)
Digital I/O: 14 (with PWM available on 6)
Memory: Flash: 32K (-2K for bootloader)
SRAM: 2K
EEPROM: 1K
Ports: Arduino I/O Pins
6 Pin header for direct wiring to off Board USB connector (Not Supplied)
Manual Reset Button
.1in. pitch holes for I/O headers (NOT Supplied) or direct connection to functions
L: 1-5/6” W: 11/16” H: 1/8” WT: .01

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.

As an example:
   ABS plastic contains styrene
   PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
   electrolytic capacitors can contain Ethylene glycol
   Brass can contain Lead
   flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
   Aluminum alloys can contain Chromium

To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!


 Product ReviewsClick here to review this item
Drop Down Resistor
A 9V battery is perfect for my application. It seems that a 470 ohm resistor between the battery and RAW brings voltage to within range for the built-in regulator to do its work.
- Dirk DeRose, OK
 
Excellent!
I have bought several, and am going to buy more! These are every bit as useful as the Uno, but so much smaller! With an external USB programming board, which MPJA also sells, I can save $$ by buying these and building them into permanent projects. Whats not to LOVE about such a tiny, low-cost, yet powerful Arduino?
- William Barnett, CT
 
Tthis board is a great value
This product is great value! I soldered six pins on the end for programming and plugged it in to Sparkfuns dev-09716 FTDI basic, pulled up the Arduino IDE selected the new com port and set the board to arduino duemilanove. It programmed just like a full sized board. This board also gives you access to 8 analog pins instead of just 6. The eight analog pins can be used as digital pins by referencing them as pins 14-thru- 21.
John Kain
 

Recently Viewed Items